The P10 led module China is the core part of the display, it arranges the LED circuit board and LED lamp beads together according to certain rules, encapsulates them with the shell, and finally performs protective treatment, and then applies them to the LED display. The parameters of the P10 led module China have a great influence on the display effect, how to choose the P10 led module China? To choose a good module, we must first understand the parameters of the P10 led module China.
1. Lighting angle
The light-emitting angle of the P10 led module China is determined by the LED lamp beads. Different lamp bead settings have different light-emitting angles. The light-emitting angle should be large, but it should not be too large, which will affect the display effect.
2. Module size
The size of the P10 led module China generally refers to the dimensions such as length, width and height. After determining the location and size of the LED full-color screen or monochrome screen to be installed, it is necessary to calculate the most suitable solution, which size module to choose, how many modules to use, and choose the optimal solution.
3. Module voltage
The voltage used by the P10 led module China is different from that of other electrical appliances, and the 12V low-voltage module is usually used. When connecting the power supply and the control system, be sure to check the voltage value first, and then connect after confirming that it is correct, otherwise the module may be burned due to excessive voltage.
4. Working temperature
The normal working temperature of the P10 led module China is generally -18°C to 58°C. If the screen is too large or the environment is special, the working temperature is likely to exceed this range. You can choose to install air conditioners or exhaust fans and other engineering accessories to cool down.